Brick & Block Quantity
Estimate masonry quantities using common Australian brick formats, standard concrete blocks or a custom unit size.
- Selected format
- Standard brick
- Net wall area
- 21.00 m²
- Approx. units per m²
- 48.4
- Units required
- 1,094
FREE MASONRY QUANTITY CALCULATOR
Estimate masonry quantities from wall area using common Australian brick formats, a standard concrete block or your own custom unit dimensions. You can also adjust the mortar-joint thickness and wastage allowance.
Estimate masonry quantities using common Australian brick formats, standard concrete blocks or a custom unit size.
When this tool is useful
How it works
The calculator uses the selected unit face dimensions plus the entered mortar-joint thickness to calculate approximate units per square metre. It multiplies that rate by net wall area, then adds the nominated wastage allowance.
Important estimating note
Brick dimensions and recommended joint details vary by product and manufacturer. Actual quantities also depend on openings, piers, corners, bond pattern, cuts and supplier packaging. Confirm the final take-off against the selected product data and project drawings.
The number depends on the brick dimensions and mortar joints. Use the selected product dimensions or supplier coverage information for the most accurate result.
A wastage allowance is commonly considered for cutting and breakage, but the appropriate percentage depends on the product, bond, wall layout and site handling.
Use the net wall area after deducting openings if you want the estimate to exclude those areas.
Related EBC guidance
EBC works on renovations, extensions and new builds across Melbourne's Eastern Suburbs.